How do I fix the white lines on my Brother printer?

How do I fix the white lines on my Brother printer?

FAQs & Troubleshooting

  1. Make sure that a torn piece of paper is not inside the printer covering the scanner window.
  2. Wipe the scanner window with a soft cloth. To see how to clean the scanner window, click here.
  3. The toner cartridge may be damaged. Put in a new toner cartridge.
  4. The drum unit may be damaged.

What causes white streaks on laser printer?

White vertical lines or streaks can be caused by a dirty or clouded laser glass, or dust or glue on the drum surface or use of Non Brother Toners.

Why is my Brother laser printer streaking?

This issue is usually resolved by cleaning and/or replacing the drum unit. Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges. Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations.

How do I fix white lines when printing laser printer?

Swapping out the cartridge for another should help you rule it out as the culprit. Vertical white lines also can signal an obstruction that prevents the laser from imaging pages correctly. Resolving that problem can require cleaning elements of the laser assembly or replacing it altogether.

How do you fix a streaked printer?

Streaking is usually caused by a worn out drum unit or spent toner cartridge….How can I fix my laser printer’s streaking issue?

  1. Remove the cartridge and rock it back and forth a few times over a trashcan to evenly redistribute the toner powder.
  2. Reinstall the toner cartridge and run a test print.

How do I clean the streaks on my Brother laser printer?

Push the release the latches of the corona wire cover (1), and then open the cover. Open the gray plastic corona wire cover by lifting the tabs or latches, located on the right and left sides of the cover. e. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right several times.

Which laser printer is better hp or brother?


  • Print/Copy/Scan/Fax
  • Print Speed
  • Max. Print Resolution
  • Max. Print Size
  • Max. Scan Area
  • Optical Scan Resolution
  • Paper Handling
  • Connectivity
  • Max. Monthly Duty Cycle
  • How do you fix a brother printer?

    Unplug the machine from the AC power outlet (electrical socket).

  • Unplug the telephone line cord from the machine.
  • Remove the jam clear cover on the back of the unit.
  • Re-insert the jam clear cover.
  • If you can not pull out the jammed paper,lift the scanner cover from the right-hand side of the machine until it locks securely into the open position.
  • How to fix brother printer not printing?

    Solution 1: Make sure your Brother printer is switched on.

  • Solution 2: Check for any error light.
  • Solution 3: Verify the Brother printer connection to the access point or router.
  • Solution 4: Reinstall the Brother printer.
  • Solution 5: Make sure that the Brother printer driver is installed and updated.
  • How to reset a brother laser printer?

    Turn off printer

  • Open the front cover and remove the toner cartridge
  • Remove the drum unit from its slot,then carefully pull out the drum unit caddy from its slot in the middle of your printer
  • Unplug power cord from back of printer for a few minutes to discharge any static electricity that may have built up inside it before touching anything else