What is flashlink?

The FLASHLINK V2 device is a round red puck like device that connects to your Windows PC (not compatible with Mac) via USB and allows you to utilize the Flashlink software to program (flash) your interface or remote start module.

How do I program my Evo all?

1- Hold down programming button while plugging in datalink connector. 2- Let go of button when LED is RED. 3- Push and hold button again until all three LEDs start to alternate. 4- Disconnect unit, she is now reset.

What is a FlashLink mini PDF?

Each FlashLink® Mini PDF In-Transit Logger is mounted on a bright green shipping card, making it easy to find when a load arrives. The card has an area for documenting shipping information and features a peel-away barcode label that can be attached to the bill of lading or other shipping documents, for traceability.

How do I update my Fortin EVO One?

You need to download the Flash-Link Manager software first. Once installed, select your vehicle. There will be 5 or 6 tabs that show up, click on the EVO-ALL Updates tab. Select your firmware from the list, then click Flash.

What is the difference between Evo One and Evo-all?

Biggest difference is the Evo-All is a bypass module which has stand-alone capabilities on some vehicles, whereas the Evo-One is a all in one high current starter with a built in bypass.

Is the Evo-all a remote starter?

Product Description. The EVO-ALL is the ultimate ALL-IN-ONE data immobilizer bypass, keyless entry, convenience, low power remote start and security interface combo module in the industry. It raises the standard of hassle-free installation convenience to a whole new level.

What is RF kit?

These Remote/RF kits are designed to add long range control to any OmegaLink, OFA, iDatalink, or Fortin digital data start system. These are not compatible with standard/analog remote start kits.

How do I reset my Fortin EVO-One?

FAQ: How do I reset my EVO-ALL? [closed]

1. Hold down programming button while plugging in datalink connector.
2. Let go of button when LED is RED.
3. Push and hold button again until all three LEDs start to alternate.
4. Disconnect unit, she is now reset.

How do I reset my Deltatrak?

To restart the unit without changing settings, press and hold down both the START and STOP buttons at the same time until stops flashing on the LCD. Release the buttons and the LCD will flash all icons while it resets.

How do I flash my Evo all?

How do I factory reset my EVO One?

1 Answer

1. turn ignition on.
2. press and hold valet switch until parking lights turn on (or red led under the yellow loop begins to flash)
3. press and release the valet switch 23 times.
4. press and release the brake pedal once.
5. press and hold valet switch for 5 seconds.

How do I start my Evo car?

Evo is keyless to start. Just push the ‘power’ button and drive. You can go anywhere, and keep it for as long as you want. Make a stopover and it’s guaranteed to be there when you get back.

What is the difference between Evo One and Evo all?

What is evo2 start?

The EVO-START2 (ANT) is the fastest response smartphone control interface. Compatible with FORTIN remote start solutions ONLY. COVERAGE MAP. Start your car from anywhere* The EVO-START2 is the fastest starter for a smartphone.

What is a RF kit for remote start?