What can I use instead of a rain gauge?

What can I use instead of a rain gauge?

If you do not have a good measuring cylinder at hand you can use two identical small bottles. A funnel is attached to one cap. And the other cap is used on the second bottle. Students can use one bottle for collecting the rain water and other transporting.

Are glass tube rain gauges accurate?

Rainwise tipping bucket rain gauges have an accuracy rating of 2% at 1.5” per hour. This means that the difference between the amount of rain collected by the manual rain gauge and the amount recorded by the Rainwise tipping bucket rain gauge for the same time period should be no more than 2%.

Does a 5 gallon bucket make a good rain gauge?

Most rain gauges for automatic weather stations are of the swinging bucket type, which must be installed in an accurately horizontal plane for correct operation.” The most accurate rain gage we have is a 5 gallon bucket in the middle of the driveway turn around.

What is the diameter of a rain gauge funnel?

The standard instrument for the measurement of rainfall is the 203mm (8 inch) rain gauge. This is essentially a circular funnel with a diameter of 203mm which collects the rain into a graduated and calibrated cylinder.

What is tipping bucket type rain gauge?

What is a tipping bucket rain gauge? A tipping bucket rain gauge is one of the most traditional tools used for weather station applications. These rain gauges include a rain-collecting funnel, two carefully calibrated “buckets” mounted on a fulcrum, and an electronic switch.

How to install and enjoy your rain gauge?

Avoid large obstacles that could block precipitation.

  • Avoid mounting the rain gauge where sprinklers or other sources of artificial precipitation can affect the data.
  • Make sure the top of the rain gauge is level.
  • Mount the rain gauge so that heavy rain could not splash into the gauge from any nearby surfaces.
  • How to make a rain Guage?

    Make a scale in centimetres on a piece of tape, using a ruler, and fix it to the side of your bottle. Find a place outside to put your rain gauge. It must be open and away from trees. Dig a hole and bury your rain gauge so that the top is sticking out of the ground. This will stop the rain gauge from blowing down on windy days.

    How to properly read a rain gauge?

    Reading a rain gauge is simple. We can look at the measurement marks on the side of a rain-capturing device, and find the level of water collected from a passing storm. Depending on what system is used where we live, we can read inches or millimeters and say how much rain has fallen. But the device collects a volume of

    How to measure rain with rain gauges?

    Check your gauge every day. To determine how much rain has fallen in the previous 24 hours,you’ll need to regularly check it every 24 hours!

  • Mark the amount of rainfall on a graph or chart.
  • Empty the rain gauge. After each recording,you’ll want to empty the rain gauge to ensure an accurate reading.
  • Calculate the averages.
  • https://www.youtube.com/watch?v=U4UomIy-qtA