How to login to buckeye router?

Log into your wireless modem by opening up a web browser and typing 192.168. 0.1 into the address bar. You will come across a login screen. The default Username is admin and the default Password is password.

How to login to buckeye router?

Log into your wireless modem by opening up a web browser and typing 192.168. 0.1 into the address bar. You will come across a login screen. The default Username is admin and the default Password is password.

Can I use my own router with Buckeye broadband?

Customers have the choice to rent a cable modem or provide their own device. These models are available for purchase at our retail stores. Find a location near you. *Please note that some model limitations may apply such as approved speeds and an included WiFi router.

How do I change my Buckeye WiFi password?

Q: How do I change my Wi-Fi password? A: If you are using a modem provided by Buckeye Broadband with a built in wireless router, you can change your Wi-Fi password by loading http://192.168.0.1 in a web browser from your home network and logging in with the appropriate credentials.

How do I reset my Buckeye modem?

This is for help resetting your modem if you have internet (data) only.

  1. Locate the modem and where it is plugged into electricity.
  2. Remove power cord from electricity.
  3. Leave unplugged for one whole minute.
  4. Plug power cord back into electricity.

What is the domain for OSU wireless?

Connect to WiFi@OSU, open a web browser and go to wireless.osu.edu.

How do I find my WiFi network name?

To find your WiFi network name and password:

  1. Make sure you’re connected to your WiFi network.
  2. In the taskbar, right-click the WiFi icon, and then select Open Network and Sharing Center.
  3. Next to Connections, select your WiFi network name.
  4. Select Wireless Properties.
  5. Select the Security tab.
  6. Select Show Characters.

Does Buckeye Cable support IPv6?

Jumping on the IPv6 bandwagon, Buckeye CableSystem has become one of the first mid-sized cable operators to begin upgrading to the next-gen Internet address numbering protocol.

How do I connect to OSU Wi-Fi?

Connect to WiFi@OSU, open a web browser and go to wireless.osu.edu. Upon being redirected to a login page, review the acceptable use policy and then log in as a guest. After logging in, your device will be allowed 12 hours of internet access after which you will need to log in again.

Why is my OSU Wi-Fi not working?

Remove (or “Forget”) any saved profiles for osuwireless, Registered4OSU, WiFi@OSU, and eduroam on your device and try to connect again. Check the signal strength. You may need to move to an area with a stronger wireless signal. Report wireless coverage issues with an online service request.

Where is the SSID on Arris router?

Your SSID and WiFi Security Key can be found printed on the white sticker located on the modem. WiFi Key: The password used to connect to your WiFi networks, as well as connect to the modem settings.

How do I use IPv6 on my router?

How to set up an IPv6 Internet connection on the Wi-Fi Routers (new logo)?

  1. Log in to the web-based interface of the router.
  2. Go to Advanced > IPv6.
  3. Enable IPv6 and select the internet connection type provided by your ISP.
  4. Fill in information as required by different connection types.
  5. Configure LAN ports.

How do I set up my Arris router?

Open a browser of your choice and type in the Arris router’s default IP address: 192.168.0.1. Hit Enter. The Arris web interface will now open and ask for your Username and Password. Enter the username and password that you have set. If you haven’t set any username and password, enter the default values of them.

What type of WiFi router does Buckeye Broadband recommend?

Buckeye Broadband recommends SmartNet powered by eero for WiFi router needs. Please visit our Fiber information page to learn more on Buckeye Fiber. NOTE: Retail modems purchased from Buckeye Broadband have a 30 day return policy.

What is the DMZ feature on my Arris router?

The DMZ feature allows you to specify one computer on your network to be placed outside of the NAT firewall. This may be necessary if the NAT feature is causing problems with an application such as a game or video conferencing application. ARRIS Router Setup – Web GUI User’s Guide Page 26of 92January 2012 Use this feature only on a temporary basis.

What is the preferred security mode for the Arris router?

Note: The preferred security mode is WPA2-PSK with AES encryption. ARRIS Router Setup – Web GUI User’s Guide Page 40of 92January 2012 Encryption Algorithm – Sets the security encryption method.