How do you set up a Plantronics hl10 lifter?

To set up the handset lifter: Plug one end of the telephone interface cable (TIC) into the phone’s handset port and the other end into the base of your Plantronics product. Plug your phone’s handset cable into the box in the middle of the TIC. Firmly press the handset lifter power cord into the handset lifter jack.

How do you set up a Plantronics hl10 lifter?

To set up the handset lifter: Plug one end of the telephone interface cable (TIC) into the phone’s handset port and the other end into the base of your Plantronics product. Plug your phone’s handset cable into the box in the middle of the TIC. Firmly press the handset lifter power cord into the handset lifter jack.

Do you need a lifter with a wireless headset?

It is like a robot that will physically lift up the phone handset to answer calls and also hang the up just like a person has to. If you want to answer calls when you are away from your desk then you will need a lifter or an electronic hook switch depending on the model of handset you have.

Is lifter necessary?

Wireless & Cordless Headsets work independently without the lifter; however, the Lifter offers you the advantage of answering and ending calls remotely away from your desk.

What is an EHS Jack?

Prerequisites. An Electronic Hook Switch (EHS) is a cable solution that connects a wireless headset base and a desk phone. An EHS enables call control functionality directly on the headset, eliminating the need for a mechanical handset lifter.

How do you know if you have a bad lifter?

Bad Lifter Symptoms

  1. #1 – Sticky Lifters. A sticky lifter remains in a collapsed state instead of going up and down.
  2. #2 – More RPM Causes More Noise.
  3. #3 – Misfires.
  4. #4 – Dead Cylinder.
  5. #5 – Check Engine Light.

What does EHS cable stand for?

Electronic Hook Switch
An Electronic Hook Switch (EHS) is a cable solution that connects a wireless headset base and a desk phone. An EHS enables call control functionality directly on the headset, eliminating the need for a mechanical handset lifter.

Why do you need a headset lifter?

A wireless headset lifter is a device that allows you to take phone calls while away from your desk. This device provides a world of convenience to those using office wireless headsets.

What happens when lifters fail?

The malfunctioning lifter will cause the pushrod to bend and fall out of space. When that happens, it leads to a dead cylinder that might break valves, rocker arms, or even damage the entire engine.

What is a hl10 handset lifter?

The Plantronics HL10 handset lifter fits on your telephone, letting you answer and end calls with the touch of a button by conveniently and automatically taking your handset off the hook. And the discreet, stylish design is backed by a one-year warranty. HL10 Handset Lifter.

How do I use the handset lifter accessory?

The handset lifter accessory will plug into the accessory port on the bottom of the cordless or wireless headset base unit. This accessory port may be covered with a rubber cap at time of purchase. If so, simply remove the cap. The lifter rests beneath the telephone handset and against the side of the telephone.

How does the hl10 work on a desktop phone?

On most desktop phones, the HL10 lifts up and replaces the handset so you don’t have to be at your desk to answer the phone or to hang up. Because the HL10 fits under the handset on your desktop phone, it requires no additional space on your desktop.

How do I use the hl10 handset Lifer with intellistand?

If you are using the HL10 handset lifer you can enable the IntelliStand feature to senses when the headset has been removed or placed into the base unit which automatically activates the Handset Lifter and enabling headset/handset mode to answer or end the call. What should I do if the Remote Handset Lifter is not lifting the handset?