What are the codes for LG washing machine?
Select LG error code on your display:
- FE – Water Overflow Error.
- OE – Drains Slowly.
- IE – Inlet Water Supply.
- UE or UB – Unbalanced Load.
- CL – Child Safety Lock.
- LE – Locked Drive Motor.
- tCL – Tub Clean Cycle.
- dE – Door is Open.
How do I force drain my LG true balance washer?
If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.
Why is my washing machine saying error?
Common appliance codes could be related to a problem with the door, a water heating sensor, a software or circuit board fault, a motor or pump fault plus much more. Simple things that could have an error code could be the door being left ajar on the machine or the detergent drawer not in situ properly.
Where is error code on LG washer?
LG washer error codes appear on the control panel display when the control board detects a problem. Look up the code being signaled and follow the troubleshooting steps to fix the problem.
How do I clear the error code on my LG dryer?
If the problem is not a dent or damage, please try the following:
- Reset the unit by unplugging it from power, or trip the circuit breaker.
- Wait 5 sec.
- Plug unit back in.
- Close door firmly.
- Select any cycle and press Start.
- If the unit gives the code again, the unit will need service.
How do I fix LG washer UE code?
If the LG washing machine UE code appears when the load is balanced, check the leveling legs under the washer. All 4 leveling legs must be firmly on the floor to provide stability when the washer spins. Press down kitty corner on the top of the washer to check its stability.
What causes LG direct drive washer error code UE?
A single-item load or small load can create an unbalanced load in an LG direct drive washer. Add a few towels to this type of load to allow the washer to balance the items and spin the basket without triggering the LG front-load washer error code UE. Oversized loads also can trigger LG direct drive washer UE error codes.
What is the difference between UE and UE on a washing machine?
The uE and UE error codes differ slightly: The uE error code appears when the washer’s electronic control board detects the unbalanced load and tries to correct the imbalance by adding water and agitating the laundry to distribute garments evenly in the spin basket. The uE code stays on while the control board runs the rebalance routing.
What should I do if my LG front load washer levelness is off?
If levelness is off by a quarter bubble or less, you don’t need to do anything. If levelness is off by more than a quarter bubble, adjust the legs. These tips will help you resolve most problems that cause the UE error code on an LG front-load washer.