How do I log into my sky router as an administrator?
How do I log in to my router settings page?
- Make sure you’re connected to your home broadband network.
- Open your browser and type 192.168.0.1 into your address bar.
- When prompted enter the username: admin and password: sky OR, your WIFI password.
How do I log into my Sagemcom router?
Type 192.168. 1.1 (the most common IP for Sagem routers) in the address bar of your web browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Sagem router is admin.
How do I reset my Sagemcom router?
Turn the back of your modem towards you. Tap and hold the Factory reset button for about 7 seconds using a sharp-pointed object (such as a paper clip). Wait while your modem restores the factory default settings.
How do I find my sky hub admin password?
The name of your WiFi network and its password are on the back or bottom of your hub (unless you’ve changed them). You can reset these to their default if you’ve forgotten what you changed them to.
What is the default username and password of sky Broadband?
0.1 and press Enter. By default the username should be admin and the password sky (all in lowercase).
What is my sky router admin password?
Sky Router Login Guide The default username for your Sky router is admin. The default password is sky. Enter the username & password, hit “Enter” and now you should see the control panel of your router.
How do I find my Sky Broadband password?
The name of your WiFi network and its password are on the back or bottom of your hub (unless you’ve changed them). You can reset these to their default if you’ve forgotten what you changed them to. Good to know: Your password is always case sensitive, so enter it exactly like its shown or how you created it.
What is the default router WIFI password?
#2) Generally, for most of the routers, the default username and password is “admin” and “admin”.
Is Sagemcom a router?
Sagemcom F@st 5260 / Fast 5260 Dual Band 802.11ac Wireless Router with 4 x Gigabit Ethernet Ports.
What are the default settings for my Sky router?
When you receive your router from Sky, it is preconfigured with the following default settings. Username: admin Password: sky For obvious reasons, these are not very secure, as anyone on Sky Broadband would potentially know your router login details.
How do I Reset my Sky Broadband Sky Hub?
You just need to hold down the reset button on the back of the Sky Hub for ten seconds, until the power light flashes. By doing a factory reset, you will revert the Sky Hub to its default settings, removing all changes you’ve made and resetting the username to admin and the password to sky For further support, ask the Sky Broadband community.
How do I set up the default settings in Sky diagnostic help?
Now you need to click on Further Diagnostic Help (marked A) In the box marked B you need to enter the default settings, Username: admin Password: sky Then press OK
How do I Change my Sky password?
Password: sky Then press OK Step 2 Click on set passwordin the top area of the screen You then need to enter your old password which is sky (marked A) Enter a new stronger password in B Then repeat the new password in C Then click apply(marked D) The page will then change to a new login box, enter your new details and then click OK