How do I fix diskette drive 0 seek failure Dell?

How do I fix diskette drive 0 seek failure Dell?

How to Fix ‘diskette drive 0 seek failure’

  1. Why you get diskette drive 0 seek failure error on startup.
  2. Method 1: Disable Drive A (Floppy Disk Drive) in BIOS settings.
  3. Method 2: Clean your floppy disk drive.
  4. Method 3: Replace your CMOS battery.

How do you disable a floppy disk?

Below is an easy way to hide that boring floppy drive icon from Explorer.

  1. Just open the Device Manager in Windows. Use shortcut, by typing devmgmt.
  2. You’ll see an entry there as “Floppy disk drives”.
  3. Under Properties, go to the Driver tab and select the Disable button.
  4. That’s all.

How do I disable floppy disk?

How to remove Floppy drive icon from Windows Explorer?

  1. Just open the Device Manager in Windows. Use shortcut, by typing devmgmt.
  2. You’ll see an entry there as “Floppy disk drives”.
  3. Under Properties, go to the Driver tab and select the Disable button.
  4. That’s all.

What are the parts of a diskette?

The basic internal components of a 3½-inch floppy disk:

  • Write-protect tab.
  • Hub.
  • Shutter.
  • Plastic housing.
  • Paper ring.
  • Magnetic disk.
  • Disk sector.

How do you fix a Dell computer that says no boot device found?

To change this:

  1. Restart the system.
  2. Press F2 during system start to enter the System Settings.
  3. Change the Boot Sequence in the Boot Settings.
  4. Leave the menu via Exit in the upper right corner of the screen.

What does diskette drive 0 seek failure mean?

Diskette drive 0 seek failure. When starting up your computer, if you experience the Diskette drive 0 seek failure error, it is due to an issue with the computer booting from a floppy disk drive or bootable device. However, this doesn’t necessarily mean there is an issue with the floppy drive itself.

Why won’t my computer recognize my diskette drive?

Check that the Diskette drive [Drive A] is disabled in the system Setup [BIOS], so that it will no longer look for the drive and see if this stops the error message. Also, check that the ‘Boot Other Device’ option is set to Disabled. Bev. 07-27-2012 03:24 PM Welcome to the Community.

Why won’t my computer recognize my floppy disk?

However, this doesn’t necessarily mean there is an issue with the floppy drive itself. Make sure the computer is not booting a non-bootable device by remove any floppy and CD in the computer.

Why is my hard drive not being seen at boot?

The error is telling you that your “floppy” drive is not being seen at boot. I will assume that most of you don’t have a floppy drive. So, you need to restart the system and boot in the the BIOS setup screen. Turn off the floppy disk in startup and check that your hard drive is seen correctly.