How do I connect DVD player to TV with cable box?
Plug the yellow cable (video) into the “Video In” jack on the back of the Comcast cable box. Next, plug the white cable (audio) into the “Audio In – L” jack on the back of the cable box. Then plug the red cable (audio) into the “Audio In – R” jack on the back of the cable box.
Do you connect DVD player to cable box or TV?
If your TV only has one HDMI input, you’ll probably want to connect the cable box to it and use a different cable type for the DVD player. If you have a receiver that hooks up to your TV’s HDMI input, you may be able to connect both the DVD player and the cable box to the receiver via HDMI.
How do I connect my DVD player to my Sony cable box and TV?
If your HD cable box and DVD player have HDMI jacks, use HDMI with the HD cable box and component video with the DVD player (as shown). This will give you the best possible picture quality. If you are not using a cable box or satellite receiver, connect the cable to the VCR’s RF IN jack.
How do I hook up my DVD player to my Samsung TV and cable box?
Connect an HDMI cable to your cable or satellite box’s HDMI out port, which should be located on the back. Connect the other end of the HDMI cable to any of the empty HDMI ports on your Samsung TV.
How do I hook up my DVD player to my Comcast cable box?
Connect Your Xfinity TV to Your DVD or VCR Player
- Make sure your Xfinity TV and DVD or VCR player are both tuned to channel 2, 3 or 4 (depending on your converter).
- Connect the wires so the cable signal passes from the main source to the converter box, then to your television. Connect your DVD/VCR using the inputs.
Can I connect a DVR to my cable box?
You can connect your DVR box to your television using several different methods. An HDMI cable is the simplest option, but you can also use an HDMI-to-DVI cable, component cable, or S-video cable depending on which ports your TV and DVR have.
How do I connect my DVD player to my Xfinity box?
How do I hook up my DVR to my cable box?
How do I hook up my DVR box?
- Connect coax cable from the wall outlet to CABLE IN on the DVR Box.
- Connect HDMI cable from the DVR Box to the HDMI input* on your HDTV.
- Connect power cord from the DVR Box to the power outlet.
- Turn on TV and tune to appropriate HDMI input.
Can you connect a cable box to TV without HDMI?
How do you connect a TV to a receiver without HDMI? You can use any RCA audio cables, a composite video cable, a 5-cable component RCA video cable, or an HDMI converter that matches the input option you have available.
Does cable box need HDMI cable?
No, you can use RCA cables to hook it up. If you see red, white, and yellow ports together, or green, blue, and red ports together, you can use RCA cables. This is your best backup option if you don’t have an HDMI port (either on your TV or cable box).
Can I use a DVR with cable TV?
The best DVR for cable TV is the TiVo Bolt+ The Bolt+ is a cable DVR and streaming device in one, and it’s no shock the original DVR champion reigns supreme. This DVR lets you record up to 150 hours of TV shows and movies.
How do I connect my Blu Ray player to my TV with a cable box?
How can I connect with TV and Blu-ray player using HDMI cable?
- Connect one end of the HDMI video and audio cable to the HDMI OUT on your blu-ray Player.
- Connect the other end of the HDMI video and audio cable to the HDMI IN on the TV as Illustrated below.
How to connect a DVD player to DirecTV receiver?
Turn on the component to be programmed.
How to connect the portable DVD player onto the TV?
Connect one side of an HDMI cable to the back of the DVD player. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV’s remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.
How to hook up a Comcast cable box?
Make sure that you have cable installed. If a Comcast representative didn’t come to your house to install cable,you’ll need to call Comcast and request the installation.
How to connect cable box to TV without HDMI?
– RCA cables are always color-coded, and each end of the cable looks like three prongs. – Red, white, and yellow cables are composite. You typically need to set your TV input to “video” to get the picture. – Green, blue, and red cables are component. – If you have a choice between both color sets, use the green and blue component cables.