How do I configure a VLAN on a SonicWALL switch?
Add a VLAN by adding a virtual interface under the uplink to the firewall.
- Navigate to DEVICE > Switch Network > Switches > Network.
- Click on Add Network.
- Define VLAN ID, Address, Subnet Mask and choose address assignment method: Static or DHCP.
- Click on OK.
How do I add a sub interface to SonicWALL?
Select a Parent Interface and Create a Sub-Interface with a VLAN ID, navigate to Network | Interfaces….
- Set the Mode/IP Assignment to Static IP Mode.
- Set an IP address for the network.
- Comment and enable the management on the sub-interface if required.
- Click OK .
What is the default starting VLAN ID SonicWALL?
2
Enter the VLAN ID in the Starting VLAN ID field. The default ID is 2.
What is VLAN translation SonicWall?
The VLAN Translation (mapping) feature allows traffic arriving on a VLAN to a Wire Mode interface operating in Secure mode to be mapped to a different VLAN on the outgoing paired interface.
What do virtual interfaces enable SonicWALL?
Supported on SonicWALL security appliances, virtual Interfaces are subinterfaces assigned to a physical interface. Virtual interfaces allow you to have more than one interface on one physical connection.
What is a virtual interface in SV?
A virtual interface is a pointer to an actual interface in SystemVerilog. It is most often used in classes to provide a connection point to allow classes to access the signals in the interface through the virtual interface pointer.
What do virtual interfaces enable?
Virtual interfaces – Virtual interfaces are assigned as subinterfaces to a physical interface and allow the physical interface to carry traffic assigned to multiple interfaces. Physical interfaces must be assigned to a zone to allow for configuration of Access Rules to govern inbound and outbound traffic.
What command is used to create a VLAN?
Adding a VLAN Directly and Entering into VLAN Configuration Mode
| Step | Actions | Commands |
|---|---|---|
| 1 | Enter global configuration mode. | switch#configure terminal |
| 2 | Enter VLAN configuration mode and/or create a VLAN. | switch(config)#vlan vlan-id |
| 3 | Configure a name for the VLAN. | switch(config-vlan)#name name |
How do you configure IP address in VLAN?
You can manually assign a static IP address to a VLAN on the managed device….Assigning a Static Address to a VLAN
- In the Mobility Master node hierarchy, navigate to the Configuration > Interfaces > VLANs page.
- Under IPv4, select Static from the IP assignment drop-down list.
- Enter the IPv4 address of the VLAN interface.
What is interface VLAN?
A VLAN Interface is a virtual interface that is attached to the physical network port or bond that your VLAN is configured on. The VLAN Interface is used to automatically tag traffic that is routed through it with the appropriate VLAN ID.
How can I configure VLANs in SonicWall NSV?
Create the VLANs. To learn how to configure the VLAN settings on your switch through the web-based utility,click here.
How to configure a VLAN?
Configuring VLANs You configure VLANs in vlan global configuration command by entering a VLAN ID. Enter a new VLAN ID to create a VLAN, or enter an existing VLAN ID to modify that VLAN. When you have finished the configuration, you must exit VLAN conf iguration mode for the configuration to take effect.
How to configure SonicWall high availability?
To configure High Availability on the Primary SonicWall, perform the following steps: Login to the SonicWall management Interface. Click Device in the top navigation menu. Navigate to High Availability | Settings. Configure the Mode as ” Active / Standby “. Check ” Enable Stateful Synchronization “.
How can configure VLAN on a switch port?
– Connect all devices to form the correct architecture – Configure interfaces so all the devices can “talk” to one another – Create VLANs and assign computers to their respective VLANs – Confirm correct configuration by demonstrating the computers cannot communicate beyond their VLAN